Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Product Description

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Generator Set Specifications

Minimum Rating
219 ekW
Maximum Rating
940 ekW
Frequency
60hz

Engine Specifications

Configuration
Vee-12, 4-stroke-Cycle-Diesel
Aspiration
Turbocharged-aftercooled aspiration
Bore
5.71in
Stroke
6.38in
Displacement
1959in³
Emissions
U.S. EPA Tier 3 / IMO II emissions certified
Rated Engine Speed
1800 rpm
Governor
Electronic (A4 ECM)
Generator
SR5 - Form Wound
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Cooling
Heat exchanger, keel or radiator cooled
Oil Change Interval
750 hrs

Generator Set Dimensions

Length
167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width
59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height
70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight
15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Standard Equipment

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger, keel or radiator cooled
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • Generators And Generator Attachments
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • Lube System
    • Oil fill, simplex filter and dipstick
  • Mounting System
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector

Optional Equipment

  • Air Inlet System
    • Closed crankcase ventilation
  • Alarm And Protection
    • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
    • IP44 generator protection
  • Exhaust System
    • Muffler
    • SOLAS approved spray shielding
  • Charging System
    • Charging alternator
  • Control System
    • EMCP 4.2 control panel
  • Fuel System
    • Installed primary fuel filter with water separator and manual or electric priming pump
    • Fuel cooler
  • Lube System
    • Duplex oil filters
  • Starting System
    • Starting motors – air, electric or dual