Product Description
Producing reliable power from 3300 to 4000 ekW at 60 Hz, our 3612 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Generator Set Specifications
- Maximum Rating
- 4000 ekW
- Minimum Rating
- 3300 ekW
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Frequency
- 60 Hz
- Speed
- 720 & 900 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- 3612 V-12,4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 13524in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 112690lb
Standard Equipment
-
- Air Inlet System
-
- Turbocharger, watercooled, engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Breather, crankcase, top-mounted
- Air inlet shutoff
-
- Cooling System
-
- Jacket water thermostats
- Engine coolant water drains
- Water temperature regulator
- Three-bundle oil cooler
- Front mounted turbos
-
- Exhaust System
-
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by Dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Oil pressure regulating valve
- Oil filler and dipstick
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Crankcase explosion relief valves
-
- Mounting System
-
- Engine and generator mounting
- Damper, torsional vibration
-
- Starting / Charging System
-
- Vane type air starter
- Air silencer
- Line group for single point custom connection
- Two motors, engine mounted at rear, on left side
-
- General:
-
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
-
- Air Inlet System
-
- Boost control valve
- Air inlet adapter
- Soot filter
- Vertical support bracket
- Air cleaner louver assembly
- Heavy duty air cleaner
-
- Cooling System
-
- Heat exchanger for single circuit
- Heating aids
- Cooling system aids
- Expansion tank
- Auxiliary water pump
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel system connections
- Fuel priming pump
- Duplex primary fuel strainer
-
- Generator System
-
- Busbar connections
- Anti-condensation space heaters
- Class F insulation
- Winding temperature detectors
- 3 Phase, six leads, WYE
-
- Governor System
-
- 723 Plus
- Digital programmers
- Electronic/actuators
- Battery backup/power supply
- 230 UA
- EGB actuator
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
-
- Starting / Charging System
-
- Redundant air starters
- Turbine type air starters
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
- Custom paint colors