Product Description
Producing reliable power from 3350 to 5320 ekW at 60 Hz, our 3616 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Generator Set Specifications
- Maximum Rating
- 5320 ekW
- Minimum Rating
- 3350 ekW
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Frequency
- 60 Hz
- Speed
- 720 & 900 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- 3616 V-16,4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 18032in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 141840lb
Standard Equipment
-
- Air Inlet System
-
- Air cleaner
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated
- Air inlet shutoff
-
- Cooling System
-
- Three-bundle oil cooler
- Jacket water thermostats
- Water temperature regulator
- Engine coolant water drains
- Front Mounted turbos
-
- Exhaust System
-
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Crankcase explosion relief valves
-
- Mounting System
-
- Damper, torsional vibration
- Engine and generator mounting
-
- Starting / Charging System
-
- Line group for single point custom connection
- Two Motors, engine mounted at rear, on left side
- Air silencer
- Vane type air starter
-
- General:
-
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
-
- Air Inlet System
-
- Heavy duty air cleaner
- Soot filter
- Boost control valve
- Vertical support bracket
- Air Inlet Adapter
- Air cleaner louver assembly
-
- Cooling System
-
- Cooling system aids
- Auxiliary water pump
- Heat exchanger for single circuit
- Expansion tank
- Heating aids
-
- Exhaust System
-
- Flexible exhaust Fittings
- Weld flange and related hardware
-
- Fuel System
-
- Duplex Primary Fuel Strainer
- Fuel priming pump
- Fuel system connections
-
- Generator System
-
- 3 Phase, Six Leads, WYE
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
- Class F insulation
-
- Governor System
-
- 723 Plus
- Electronic/actuators
- EGB actuator
- Digital programmers
- 230 UA
- Battery backup/power supply
-
- Lube System
-
- Lube ANSI Adapter (Emergency connection)
- Oil pan drain valve
-
- Mounting System
-
- Isolator
- Non-vertically Restrained
- Vertically Restrained
- Spring type vibration isolators
-
- Starting / Charging System
-
- Pressure reducing valve
- Compressed air flex hose
- Turbine type air starters
- Redundant air starters
-
- General:
-
- Custom paint colors