DG450-2 (Single-phase)

Product Description

The Cat® spark-ignited generator product line for stationary applications feature permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation and 2/3 pitch incorporated.

Generator Set Specifications

Frequency
60 Hz
Natural Gas Rating
450 ekW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Voltage
120/208, 120/240, 277/480, 346/600 VAC
Displacement
1336.42in³
Fuel Type
Natural Gas
Speed
1800 rpm

Engine Specifications

Engine Model
G21.9L V12, 4-Cycle, Spark -Ignited
Fuel System
Carburetor, Down Draft
Aspiration
Turbocharged - Aftercooled
Governor Type
Electronic
Bore
5.03in
Stroke
5.6in
Compression Ratio
10.0:1

Generator Set Dimensions

Length
154.4in
Width
71in
Height
67in
Weight
8274lb

Standard Equipment

  • Cooling
    • Closed coolant recovery system
    • 50/50 Ethylene glycol antifreeze
    • Factory-installed radiator
  • Fuel
    • Fuel pressure test po
    • Low fuel pressure switch
    • Primary and secondary fuel shut-off
  • Generator
    • Class H insulation material
    • Permanent magnet excitation
    • Full load capacity alternator
  • Controls
    • EMCP 4.2 Series generator set controller
  • Mounting
    • Vibration isolaton (puck type)
  • Electric Starting And/or Prelube
    • Engine electrical system
    • Battery cables
    • Solenoid activated starter motor
  • Electric Power - Package Serial Number Prefix
    • Battery charging alternator

Optional Equipment

  • Generator
    • Thermal magnetic or electronic trip MCCBs
    • Anti-condensation heater
    • Shunt trip and auxiliary contact breaker