Cat?� 3516C Industrial Diesel Engine

Product Description

The Cat?� 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Power Rating

Maximum Power
2100hp
Maximum Torque
7563lb-ft @ 1300 rpm
Rated Speed
1750 rpm
Minimum Power
2100hp

Emission Standards

Emissions
U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)

Engine Dimensions - Approximate

Length
129.1in
Width
60.2in
Height
81.2in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
17284lb

General

Engine Configuration
V-16, 4-Stroke-Cycle Diesel
Bore
6.7in
Stroke
8.5in
Displacement
4760in³
Compression Ratio
14.7:1
Aspiration
Turbocharged Aftercooled
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Standard Equipment

  • Air Inlet System
    • Air to Air Aftercooled (ATAAC)
    • Four turbochargers, center mounted
  • Control System
    • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
  • Cooling System
    • Thermostats and housing
    • Gear driven centrifugal jacket water pump
    • Connections for radiator cooling
  • Exhaust System
    • Exhaust manifold, dry
    • Four turbochargers with watercooled bearings
    • Two exhaust outlets, 203 mm (8 in) round flange
  • Flywheels And Flywheel Housing
    • SAE No. 00 flywheel (183 teeth)
    • SAE No. 00 flywheel housing
  • Fuel System
    • Fuel filter, LH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • No standard instrument or gauge panel
  • Lube System
    • Crankcase breather, top mounted
    • Oil cooler
    • Oil filler and dipstick, LH
    • Oil pump
    • Oil filter, LH, spin-on type
    • Front sump oil pan, 500-hour change interval
  • Mounting System
    • Trunnion front support
  • Power Take Off
    • Front housing, two-sided
  • Protection System
    • ADEM A4 ECM monitoring system to provide customer programmable engine
    • Deration strategies to protect against adverse operating conditions
    • Emergency stop logic inputs provided at 40 pin customer interface connection
  • Starting System
    • Dual 24V electric starting motor, LH, unwired
  • General
    • Paint: Caterpillar yellow
    • Vibration damper
    • Lifting eyes