Product Description
The Cat?� 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.
Power Rating
- Maximum Power
- 2100hp
- Maximum Torque
- 7563lb-ft @ 1300 rpm
- Rated Speed
- 1750 rpm
- Minimum Power
- 2100hp
Emission Standards
- Emissions
- U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
Engine Dimensions - Approximate
- Length
- 129.1in
- Width
- 60.2in
- Height
- 81.2in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments
- 17284lb
General
- Engine Configuration
- V-16, 4-Stroke-Cycle Diesel
- Bore
- 6.7in
- Stroke
- 8.5in
- Displacement
- 4760in³
- Compression Ratio
- 14.7:1
- Aspiration
- Turbocharged Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
Standard Equipment
-
- Air Inlet System
-
- Air to Air Aftercooled (ATAAC)
- Four turbochargers, center mounted
-
- Control System
-
- ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)
-
- Cooling System
-
- Thermostats and housing
- Gear driven centrifugal jacket water pump
- Connections for radiator cooling
-
- Exhaust System
-
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
- Two exhaust outlets, 203 mm (8 in) round flange
-
- Flywheels And Flywheel Housing
-
- SAE No. 00 flywheel (183 teeth)
- SAE No. 00 flywheel housing
-
- Fuel System
-
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
-
- Instrumentation
-
- No standard instrument or gauge panel
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
-
- Mounting System
-
- Trunnion front support
-
- Power Take Off
-
- Front housing, two-sided
-
- Protection System
-
- ADEM A4 ECM monitoring system to provide customer programmable engine
- Deration strategies to protect against adverse operating conditions
- Emergency stop logic inputs provided at 40 pin customer interface connection
-
- Starting System
-
- Dual 24V electric starting motor, LH, unwired
-
- General
-
- Paint: Caterpillar yellow
- Vibration damper
- Lifting eyes