Product Description
Oil and gas drilling is a complex task that requires specialized power generation equipment. Cat 3500 power modules are specifically designed for drilling operations of electric AC rigs. The 3500 platform carries decades of field experience in drilling operations across a wide variety of environmental conditions. Cat power modules are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3512 land drilling power module rating: 790-1035 ekW (1130-1430 kVA) @ 50/60 Hz (1000/1200/1500 rpm). Not emissions certified, available for non-regulated areas.
Engine Specifications
- Minimum Rating
- 665ekW
- Maximum Rating
- 1035ekW
- Emissions
- Non-certified
- Oil Change Interval
- 500h
- Aspiration
- Turbocharged-Aftercooled
- Engine Control and Protection
- Woodward
- Stroke
- 7.48in
- Displacement
- 3158in³
- Bore
- 6.69in
- Generator
- SR4B
- Weight
- 34644lb
- Voltage
- 600
- Fuel System
- MUI
Dimensions
- Width
- 93.9in
- Length
- 310in
- Height
- 115.6in
Capacity for Liquids
- Lube Oil System - Refill
- 84gal (US)
- Cooling System - Engine
- 41gal (US)
Standard Equipment
-
- Air Inlet System
-
- Corrosion-resistant aftercooler core
- Regular duty air cleaner
- Service indicator
-
- Control System
-
- Governor, Woodward EG6PC actuator — RH
- Magnetic pickup
-
- Cooling System
-
- Thermostats and housing (dual outlet)
- Jacket water pump, gear driven
-
- Exhaust System
-
- Dry exhaust manifold
- Exhaust flexible fitting, adapters, and flanges
-
- Flywheel And Housing
-
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Fuel filter
- Fuel transfer pump
- Flexible fuel lines
- Fuel priming pump
-
- Generator
-
- Oilfield generator
- Twin-bearing, close-coupled
-
- Instrumentation
-
- Analog instrument gauges:
-
- Lubrication System
-
- Crankcase breather
- Oil cooler
- Oil filter
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
-
- Mounting System
-
- Oilfield base 7.85 m (25 ft 9 in) length Heavy-duty land rig inner baseframe — three-point mount to oilfield base
-
- Power Take-offs
-
- Accessory drive
- Front housing, two-sided
-
- Protection System
-
- Hydra-mechanical shutoffs (low oil pressure, high water temperature and overspeed, air inlet shutoff). Monitoring gauge and emergency remote shutoff
- Alarm switches, low oil pressure, high water temperature (Marine Society approved) for connection to customer supplied alarm panel
- Manual shutoff control, LH
-
- Starting System
-
- Air starting motor
- Air silencer
-
- General
-
- Paint - Cat yellow
- Vibration damper and guard
- Lifting eyes
Optional Equipment
-
- Air Inlet System
-
- Heavy duty air cleaner
- Remote air inlet adapters
-
- Control System
-
- Load sharing governor, 2301A
- Load sharing module
- Governor conversion to 0-200 mA direct rack control
-
- Cooling System
-
- Coolant level sensors
- Connections
-
- Exhaust System
-
- Exhaust elbows
- Exhaust mufflers
-
- Fuel System
-
- Primary fuel filter
-
- Generator And Attachments
-
- Low voltage extension box
- Potential and current transformers
- Air filter
- Cable access box
- Bearing RTDs
-
- Instrumentation
-
- Customer management device
- Gauges and instrumentation panels
- Switches and contactors
-
- Lubrication System
-
- Crankcase fumes disposal
- Oil pan accessories
-
- Mounting System
-
- Bases
-
- Power Take-off
-
- Crankshaft pulley
- Front stub shaft
- Charging alternator
-
- Protection System
-
- Explosion relief valves (3)
- Shutoffs
- Switches and contactors
-
- Starting System
-
- Manual air starter
- Air pressure regulator
-
- General
-
- Engine barring group