3516 Land Electric-Drive Drilling Module

Product Description

Oil and gas drilling is a complex task that requires specialized power generation equipment. Cat 3500 generator sets are specifically designed for drilling operations of electric AC rigs. The 3500 platform carries decades of field experience in drilling operations across a wide variety of environmental conditions.Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.3516 land drilling generator set. Ratings: 1256 ekW (1835 kVA) @ 60 Hz (1200 rpm). Not emissions certified, available for non-regulated areas.

Engine Specifications

Minimum Rating
1245ekW
Maximum Rating
1245ekW
Emissions
Non-certified
Bore
6.69in
Oil Change Interval
500h
Generator
SR4B
Aspiration
Turbocharged-Aftercooled
Weight
40433lb
Engine Control and Protection
Woodward
Voltage
600
Stroke
7.48in
Displacement
4210in³
Fuel System
MUI

Dimensions

Length
310in
Width
93.9in
Height
98.3in

Capacity for Liquids

Cooling System - Engine
61.5gal (US)
Lube Oil System - Refill
107gal (US)

Standard Equipment

  • Air Inlet System
    • Corrosion-resistant aftercooler core
    • Regular duty air cleaner
    • Service indicator
  • Control System
    • Governor, Woodward EG6PC actuator — RH
    • Magnetic pickup
  • Cooling System
    • Thermostats and housing (dual outlet)
    • Jacket water pump, gear driven
  • Exhaust System
    • Dry exhaust manifold
    • Exhaust flexible fitting, adapters, and flanges
  • Flywheel And Housing
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Flexible fuel lines
    • Fuel priming pump
  • Generator
    • Oilfield generator
    • Twin-bearing, close-coupled
  • Instrumentation
    • Analog instrument gauges:
  • Lubrication System
    • Crankcase breather
    • Oil cooler
    • Oil filter
    • Shallow oil pan
    • Oil drain extension, 2 in NPT female connection
  • Mounting System
    • Oilfield base 7.85 m (25 ft 9 in) length
    • Heavy-duty land rig inner baseframe — three-point mount to oilfield base
  • Power Take-offs
    • Accessory drive
    • Front housing, two-sided
  • Protection System
    • Hydra-mechanical shutoffs (low oil pressure, high water temperatureand overspeed, air inlet shutoff). Monitoring gauge and emergencyremote shutoff
    • Alarm switches, low oil pressure, high water temperature (MarineSociety approved) for connection to customer supplied alarm panel
    • Manual shutoff control, LH
  • Starting System
    • Air starting motor
    • Air silencer
  • General
    • Paint - Cat yellow
    • Vibration damper and guard
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Heavy duty air cleaner
    • Remote air inlet adapters
  • Control System
    • Load sharing governor, 2301A
    • Load sharing module
    • Governor conversion to 0-200 mA direct rack control
  • Cooling System
    • Coolant level sensors
    • Connections
  • Exhaust System
    • Exhaust elbows
    • Exhaust mufflers
  • Fuel System
    • Primary fuel filter
  • Generator And Attachments
    • Low voltage extension box
    • Potential and current transformers
    • Air filter
    • Cable access box
    • Bearing RTDs
  • Instrumentation
    • Customer management device
    • Gauges and instrumentation panels
    • Switches and contactors
  • Lubrication System
    • Crankcase fumes disposal
    • Oil pan accessories
  • Mounting System
    • Bases
  • Power Take-off
    • Crankshaft pulley
    • Front stub shaft
    • Charging alternator
  • Protection System
    • Explosion relief valves (3)
    • Shutoffs
    • Switches and contactors
  • Starting System
    • Manual air starter
    • Air pressure regulator
  • General
    • Engine barring group