Product Description
Oil and gas drilling is a complex task that requires specialized power generation equipment. Cat 3500 generator sets are specifically designed for drilling operations of electric AC rigs. They combine decades of field experience of the 3500 platform with technology in electronics to ensure highest performance, low emissions, and simplified operator interface. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516B land drilling generator set. Ratings: 1320 ekW (1885 kVA) @ 60 Hz (1200 rpm). Not emissions certified, available for non-regulated areas.
Engine Specifications
- Emissions
- Non-certified
- Displacement
- 4210in³
- Generator
- SR4B
- Stroke
- 7.48in
- Oil Change Interval
- 500h
- Fuel System
- EUI
- Engine Control and Protection
- ADEM A3
- Weight
- 41469lb
- Bore
- 6.69in
- Aspiration
- Turbocharged-Aftercooled
- Voltage
- 600
Dimensions
- Width
- 93.9in
- Length
- 310in
- Height
- 99.2in
Capacity for Liquids
- Lube Oil System - Refill
- 107gal (US)
- Cooling System - Engine
- 61.5gal (US)
Standard Equipment
-
- Air Inlet System
-
- Corrosion-resistant aftercooler core
- Air Inlet shutoff
- Regular duty air cleaner
-
- Control System
-
- ADEM A3 ECU, left-hand mounted
- Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
-
- Cooling System
-
- Separate-circuit aftercooled
- Outlet controlled jacket water thermostat
- Jacket water pump - gear driven
- Dual outlet
- Aftercooler water pump - gear driven
- Aftercooler water thermostat
-
- Exhaust System
-
- Dry exhaust manifold
- Dual turbochargers, water cooled bearings
-
- Flywheel And Housing
-
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Fuel filter simplex (LH) with priming pump (LH)
- Fuel transfer pump
- Fuel return line with flexible connection
- Electronic unit injectors
-
- Generator Attachments
-
- Barrel-mounted petroleum terminal box with air filter and pressure differential switch
-
- Instrumentation
-
- Emergency stop button
- Analog gauges:
- Service port connector
- Customer connection terminal blocks
-
- Emcp 4.3 Control Panel
-
- 140 mm (5.5 in) Graphical Display
- Communication
- Controls
- Generator Set Protection
- Outputs
- Inputs
- Other Features
-
- Lubrication System
-
- Crankcase breather
- Oil cooler
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
- Simplex oil filter
-
- Mounting System
-
- 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
-
- Protection System
-
- Engine alarms, derate, and shutdown in abnormal operation
-
- Starting System
-
- TDI air starting motor, RH - 1034 kPa (150 psi)
-
- General
-
- Paint - Cat yellow
Optional Equipment
-
- Air Inlet System
-
- Heavy duty air cleaner
- Remote air inlet adapter - rectangular
- Remote air inlet adapter - round
-
- Control System
-
- Engine control options:
- Load sharing governor, 2301A
-
- Cooling System
-
- Radiator options:
- Coolant level sensor
- Coolant conditioner
- Cooling system connection options (for use with customer-supplied radiator):
- Fan drive and belt guard (for use with remote and customersupplied radiators)
- Fan pulley options (for use with customer-supplied radiator):
-
- Exhaust System
-
- 1200 rpm model only:
- 1500 rpm model only:
-
- Fuel System
-
- Custom fuel filter
- Primary fuel filter
- Primary fuel filter with water separator
-
- Generator Attachments
-
- Cable access box
- Air filter
- Bearing RTDs
- Low voltage extension box
- Manual voltage control
-
- Instrumentation
-
- Communications module PL1000T
- Communications module PL1000E
- Thermocouples installed, one per cylinder
-
- Lubrication System
-
- Custom oil filter
- RH installed centrifugal oil filter
- SAE15W40, Caterpillar DEO, 500 hour
- Crankcase fumes disposal
- Oil level regulator
-
- Mounting System
-
- Bases
- Vibration isolators, rails
-
- Power Take-off
-
- Alternator, 24V, 68A
- Front accessory drive
- Pulleys
-
- Protection System
-
- Explosion relief valves (3)
- Metal particle detector switch
- Metal particle detector with annunciator
-
- Starting System
-
- Custom starting motor
- Air pressure regulator
-
- General
-
- LH installed engine barring group
- Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
- Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
- Jacket water heater lines