Product Description
G3600 A4 engines provide a wide range of power options to fit your gas compression application. G3600 A4 engines bring the highest uptime in the industry and long operating intervals between overhauls. Operators that use G3600 A4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3616 A4 Gen 1 gas engine with standard ratings: 3729 bkW (5000 bhp) @ 1000 rpm and Cat G3616 A4 Gen 2 gas engines with standard ratings: 3729 bkW (5000 bhp) and uprated ratings: 4101 bkW (5500 bhp) @ 1000 rpm. NSPS site compliant capable.
Engine Specifications
- Maximum Rating
- 5500BHP
- Rated Speed
- 1000rpm
- Emissions
- Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
- Minimum Rating
- 5000BHP
- Compression Ratio
- Gen 1 (9.2:1) Gen 2 (7:6:1)
- Aspiration
- Turbocharged - Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel Teeth
- 255
- Displacement
- 20698in³
- Oil Change Interval
- 5000 hours
- Ignition, Protection
- Electronic, ADEM™4
- Stroke
- 11.8in
- Bore
- 11.8in
- Length
- 231.38in
- Width
- 102.28in
- Height
- 129.05in
- Weight - Dry
- 70301lb
Capacity for Liquids
- Cooling System
- 211gal (US)
- Lube Oil System - Refill
- 351gal (US)
Standard Equipment
-
- Air Inlet System
-
- Air cleaner
- Air inlet adapter
-
- Cooling System
-
- ADEM 4
- ANSI Class 150 6 inch Flange (inlet water connection)
- ANSI Class 150 4 inch Flange (outlet water connection)
- Engine driven water pump
- Jacket Water inlet connection
- Engine Mounted, two stage, plate-fin aftercooler
- Jacket Water outlet regulator 88°C
-
- Engine Rating
-
- Engine rating and speed selection
-
- Exhaust System
-
- Hard Heat Shielded Exhaust manifold
- Vertical Exhaust Outlet
-
- Flywheel And Flywheel Housing
-
- Engine Barring Device
- SAE Standard Flywheel
-
- Fuel System
-
- ANSI Class 150 2 inch Flange ( Customer Connect)
- Fuel Filter
- Fuel Valve with electronically controlled fuel supply pressure
- Gas supply and and shut-off valves — electronically controlled fuel supply pressure
-
- General
-
- Four lifting eyes
- Paint, Caterpillar Yellow
- Shipping Skid
- Storage Preservation
-
- Instrumentation
-
- HMI Panel
-
- Lube System
-
- Breathers
- Closed Crankcase Ventilation System
- Engine-driven oil pump
- Front and Rear oil Drains
- Oil Cooler
- Oil Filter
- Oil Supply line
- Oil Pan
- Prelube Pump
-
- Mounting System
-
- Six mounting feet
-
- Power Take-offs
-
- Damper
- Damper Guard
-
- Protection Systems
-
- Crankcase explosion relief valve
- Protection Shutdown Levels
-
- Starting System
-
- Air Start Motor
-
- Telematic System
-
- Cat® Connect Technology
Optional Equipment
-
- Charging System
-
- Charging alternator
-
- Exhaust System
-
- Lifting eye exhaust shield
- Valve Spring Compressor Tools
-
- Fuel System
-
- Fuel Connection Hose
- Gas Pressure Regulator
-
- General
-
- Cell - Stellite Radio
- Language Decals
- Paint Colors
- Service Tools
-
- Lube System
-
- Lubricating Oil
- Oil Level Regulator
-
- Mounting System
-
- Flex EXH Fitting
- Mounting Plates
-
- Power Take-offs
-
- Stub Shaft
-
- Telematic System
-
- Service Communications Adapter
- Product Link Extension Harness
- Product Link Lan Adapter