Product Description
Caterpillar is leading the power generation marketplace with Fast Response generator sets engineered to deliver unmatched performance, reliability, and cost-effectiveness.
Generator Set Specifications
- Gas Standby Rating
- 2000 ekW @ 0.8pf
- Fuel Type
- Natural Gas, Hydrogen Blend (up to 5%)
- Emissions/Fuel Strategy
- U.S. EPA Stationary Non-Emergency Certified
- Frequency
- 60 Hz
- RPM
- 1800 rpm
- Compression Ratio
- 11.5
Engine Specifications
- Engine Model
- G3520
- Displacement
- 5956in³
- Aspiration
- TA
- Bore
- 6.7in
- Stroke
- 8.5in
Generator Set Dimensions
- Length
- 336in
- Width
- 94in
- Height
- 128in
- Weight
- 48500lb
Standard Equipment
-
- Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
- Control Panel
-
- Cat ECS 100
-
- Cooling
-
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
-
- Exhaust
-
- Dry exhaust manifolds, insulated and shielded
- Cat-flanged face outlet on turbocharger
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
-
- Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Engine-installed electronic control valve
- Gas pressure regulator
- Throttle plate, 24V DC actuator, controlled by GECM
- 24V DC energized-to-run (ETR) gas shutoff valve
-
- General
-
- Parts book
- Paint- Caterpillar Yellow with high gloss black rails and radiator
- Operation and maintenance manuals
- Crankshaft vibration damper and guard
- RH Service
-
- Generator
-
- Permanent Magnet Excitiation
- Integrated voltage regulator (IVR)
- SR5
- Winding temperature detectors
- Anti-condensation space heater
- NEMA Class H insulation
-
- Starting/charging
-
- 24V starting motors
- Battery with cables and rack (shipped loose)
- Jacket water heater
- Electric Starter
-
- Governing System
-
- ADEM A4
-
- Ignition System
-
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
Optional Equipment
-
- Air Inlet
-
- Air cleaner with precleaner
-
- Control Panel
-
- EMCP 4.4
- Local alarm module
- Engine failure relay
- Remote annunciator
- Remote PC monitoring
- Local PC monitoring
-
- Circuit Breakers
-
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
- Frame mounting
- 3-pole (IEC 947-2 rated)
- 2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
-
- Cooling
-
- Package mounted radiator
- Coolant level drain line with valves, fan with guard
-
- Exhaust
-
- 18, 25 dBA Attenuation
- 305mm (12 in) spark arresting muffler
- 305 mm (12in.) elbow
- 305 mm (12 in.) flange
- 305 mm (12 in.) muffler
-
- Fuel System
-
- 3, 0-100 kPag, 4-20mA gas train pressure sensors
-
- General
-
- Digital diagnostic tool
-
- Generator
-
- Bearing temperature detectors
- Generator air filter
- Cable access box
- European bus bars
- Low voltage extension box
-
- Starting/charging
-
- 20A, 24VDC battery charger
- 45A, 24V charging alternator (requires engine driven pumps)
-
- Grid Code Compliance
-
- 60 Hz: USA