Product Description
Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3408C engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3408C engines include gas lift, gas gathering, and wellhead gas compression. Cat G3408C gas engine. Ratings: 317 bkW (425 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment or available for non-regulated areas.
Engine Specifications
- Maximum Rating
- 425BHP
- Emissions
- NSPS Site Compliant Capable or Non-regulated
- Displacement
- 1099in³
- Minimum Rating
- 425BHP
- Compression Ratio
- 8.5:1
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Weight - Dry
- 4950lb
- Oil Change Interval
- 750 hours
- Ignition, Protection
- Cat EIS
- Stroke
- 6in
- Bore
- 5.4in
Capacity for Liquids
- Cooling System
- 14.5gal (US)
- Lube Oil System - Refill
- 39gal (US)
Standard Equipment
-
- Air Inlet System
-
- Air cleaner — single element with service indicator
-
- Control System
-
- Electronic governor
- Air/fuel ratio control
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheel & Flywheel Housing
-
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator (1.5 to 5 psi gas supply required)
- Natural gas carburetor
-
- Ignition System
-
- Cat Electronic Ignition System (EIS) with detonation sensitive timing
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil pan — deep sump
- Oil filler — RH in valve cover and RH dipstick
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Detonation sensitive timing control
- Shutoff
-
- General
-
- Paint — Cat yellow
- Crankshaft vibration damper and pulleys
- Lifting eyes
- Cylinder block inspection covers
Optional Equipment
-
- Air Inlet System
-
- Air cleaner — two-stage
- Air inlet adapter
- Precleaner
- Air cleaner rain cap
-
- Charging System
-
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
- Cooling System
-
- Radiators
- Blower fan and fan drives for customer suppliedradiators
- Expansion tank
- Heat exchangers
-
- Exhaust System
-
- Flexible fittings
- Elbows
- Flanges
- Rain caps
- Mufflers
- Exhaust manifold — instrument holes at each port
-
- Fuel System
-
- Dual gas regulator
- Carburetor kits
- Fuel filter
-
- Ignition System
-
- CSA ignition
- Ignition ground wiring harness
- Power supply
-
- Instrumentation
-
- Alarm module
- Gauges and instrument panels
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft
- Flywheel stub shaft
- Pulley removal
-
- Protection System
-
- Gas valves
- Status control box interconnect wiring harness
-
- Starting System
-
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric start control
- Electric starting motors — single 24V
- Starting aids
- Battery sets — (24V dry), cables, and rack
-
- General
-
- Special paint