Product Description
Producing reliable power from 1963 to 2688 kVA at 50 Hz, our 3606 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Generator Set Specifications
- Maximum Rating
- 2688 kVA
- Minimum Rating
- 1775 kVA
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Frequency
- 50 Hz
- Speed
- 750 & 1000 rpm
- Duty Cycle
- Continuous
Engine Specifications
- Engine Model
- 3606 I-6, 4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 6762in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 74970lb
Standard Equipment
-
- Air Inlet System
-
- Breather, crankcase, top-mounted
- Air inlet shutoff
- Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
-
- Cooling System
-
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
-
- Exhaust System
-
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Crankcase explosion relief valves
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
-
- Mounting System
-
- Damper, torsional vibration
- Engine and generator mounting
-
- Starting / Charging System
-
- One motor, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
- Line group for single point custom connection
-
- General:
-
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
-
- Air Inlet System
-
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Air cleaner
-
- Cooling System
-
- Expansion tank
- Auxiliary water pump
- Cooling system aids
- Heating aids
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel system connections
- Duplex primary fuel strainer
- Fuel priming pump
-
- Generator System
-
- Class F insulation
- 3 Phase, six Leads, WYE
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
-
- Governor System
-
- Electronic/actuators
- Digital programmers
- 2301 A load share
- EGB actuator
- Battery backup/power supply
- 723 Plus
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Non-vertically restrained
- Spring type vibration isolators
- Vertically restrained
- Isolator
-
- Starting / Charging System
-
- Compressed air flex hose
- Pressure reducing valve
-
- General:
-
- Custom paint colors