Product Description
Producing reliable power from 2363 to 3575 kVA at 50 Hz, our 3608 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Generator Set Specifications
- Maximum Rating
- 3575 kVA
- Minimum Rating
- 2363 kVA
- Emissions/Fuel Strategy
- Low Fuel Consumption
- Frequency
- 50 Hz
- Speed
- 750 & 1000 rpm
- Duty Cycle
- Standby, Prime, Continuous
Engine Specifications
- Engine Model
- 3608 I-8,4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 9064in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 91050lb
Standard Equipment
-
- Air Inlet System
-
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
- Air inlet shutoff
-
- Cooling System
-
- Water temperature regulator
- Jacket water thermostats
- Engine coolant water drains
-
- Exhaust System
-
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
- Crankcase explosion relief valves
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Oil pressure regulating valve
-
- Mounting System
-
- Engine and generator mounting
- Damper, torsional vibration
-
- Starting / Charging System
-
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
- Vane type air starter
-
- General:
-
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
-
- Air Inlet System
-
- Air cleaner louver assembly
- Air inlet adapter
- Heavy duty air cleaner
- Vertical support bracket
- Soot filter
- Boost control valve
-
- Cooling System
-
- Expansion tank
- Auxiliary water pump
- Heating aids
- Cooling system aids
-
- Exhaust System
-
- Flexible exhaust fittings
- Weld flange and related hardware
-
- Fuel System
-
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
-
- Generator System
-
- Winding temperature detectors
- Anti-condensation space heaters
- Busbar connections
- 3 Phase, six Leads, WYE
- Class F insulation
-
- Governor System
-
- Digital programmers
- 2301 A load share
- 723 Plus
- EGB actuator
- Electronic/actuators
- Battery backup/power supply
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
-
- Starting / Charging System
-
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
- Custom paint colors