Product Description
Producing reliable power from 2200 to 2420 ekW at 60 Hz and 2938 to 3250 kVA at 50 Hz, our C280-8 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set can be configured to meet IMO/EPA Tier 2 or EPA Tier 4 Final.
Generator Set Specifications
- Maximum Rating
- 2420 ekW (60Hz), 3250 kVA (50Hz)
- Minimum Rating
- 2200 ekW (60Hz), 2938 kVA (50Hz)
- Emissions/Fuel Strategy
- EPA Tier 4 Final, IMO Tier 2
- Frequency
- 50 / 60 Hz
- Speed
- 900 / 1000 rpm
- Duty Cycle
- Prime, Continuous
Engine Specifications
- Engine Model
- C280-8, I-8,4-Stroke Water-Cooled Diesel
- Bore
- 11in
- Stroke
- 11.8in
- Displacement
- 9064in³
- Compression Ratio
- 13:01
- Aspiration
- TA
- Fuel System
- Direct unit injection
- Governor Type
- Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum
- 404in
- Width - Maximum
- 99.62in
- Height - Maximum
- 156.6in
- Dry Weight - Genset (maximum)
- 91050lb
Standard Equipment
-
- Air Inlet System
-
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Air inlet shutoff
-
- Cooling System
-
- Engine coolant water drains
- Jacket water thermostats
- Water temperature regulator
-
- Exhaust System
-
- Includes adapter, flexible exhaust fitting
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Oil filler and dipstick
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
-
- Mounting System
-
- Engine and generator mounting
- Damper, torsional vibration
-
- Starting / Charging System
-
- Air silencer
- Vane type air starter
- One motor, engine mounted at rear, on left side
- Line group for single point custom connection
-
- General:
-
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
-
- Air Inlet System
-
- Air cleaner louver assembly
- Boost control valve
- Soot filter
- Vertical support bracket
- Heavy duty air cleaner
- Air inlet adapter
-
- Cooling System
-
- Heating aids
- Auxiliary water pump
- Cooling system aids
- Expansion tank
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel priming pump
- Fuel system connections
- Duplex primary fuel strainer
-
- Generator System
-
- 3 Phase, six Leads, WYE
- Class F insulation
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters
-
- Governor System
-
- Battery backup/power supply
- EGB actuator
- 2301 A load share
- Electronic/actuators
- Digital programmers
- 723 Plus
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
-
- Mounting System
-
- Spring type vibration isolators
- Isolator
- Vertically restrained
- Non-vertically restrained
-
- Starting / Charging System
-
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
- Custom paint colors