Product Description
The C4.4 IPU engine is a common rail direct injection engine with either a single turbo or twin turbo chargecooled air system. It meets U.S. EPA Tier 4 Final, EU Stage V and Japan 2014 (Tier 4 Final) emission standards. For ease of installation, the IPU provides full aftertreatment mounting, an integrated cooling system and inlet air filter mounted to the IPU.
Power Rating
- Maximum Power
- 188hp
- Maximum Torque
- 601lb-ft @ 1400 rpm
- Rated Speed
- 2000 - 2200 rpm
- Minimum Power
- 137hp
Emission Standards
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Japan 2014 (Tier 4 Final)
General
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 4.1in
- Stroke
- 5in
- Displacement
- 268.5in³
- Compression Ratio
- 16.0:2
- Aspiration
- Turbocharged Aftercooled (TA) or Twin Turbocharged Aftercooled (TTA)
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF+SCR
Power Unit Dimensions
- Length
- 60.3in
- Width
- 34.2in
- Height
- 53.7in
- Weight
- 1559lb
Standard Equipment
-
- Air Inlet System
-
- Standard air cleaners
-
- Control System
-
- Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
- Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
-
- Cooling System
-
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
- Guidance on cooling system design available through your dealer to ensure equipment reliability
-
- Flywheels And Flywheel Housing
-
- Wide choice of drivetrain interfaces, including SAE No. 2 and SAE No. 3 configurations
-
- Fuel System
-
- Electronic high pressure common rail
- Innovative filter design to ensure maximum protection of the engine
-
- Lube System
-
- Wide choice of sumps for different applications
-
- Power Take Off
-
- SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
-
- General
-
- Available with or without a balancer
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment, Japan 2014 (tier 4 Final) / Clean Emissions Control Equipment
-
- Diesel Oxidation Catalyst (DOC) / Diesel Particulate Filter (DPF) / Selective Catalytic Reduction (SCR)
- No ash service requirement
- Passive regeneration