Cat?�3054C Industrial Diesel Engine

Product Description

The Cat?� 3054C Industrial Diesel Engine is offered in ratings ranging from 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm. These ratings meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for other regulated and non-regulated areas. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Power Rating

Maximum Power
130hp
Maximum Torque
369lb-ft @ 1400 rpm
Rated Speed
2200-2400 rpm
Minimum Power
69.7hp

Emission Standards

Emissions
U.S. EPA Tier 2 Equivalent, EU Stage II Equivalent

Engine Dimensions - Approximate

Length
26.1in
Width
24.4in
Height
31.9in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
674.6lb

General

Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1in
Stroke
5in
Displacement
269in³
Compression Ratio
16.2:1
Aspiration
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-

Standard Equipment

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator
    • Starter motor
    • Control Panel
    • Glow plug starting aid
  • Cooling System
    • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
    • 50:50 water glycol mix
  • Flywheels And Flywheel Housing
    • SAE No. 3 flywheel housing
    • Flywheel and starter rings
  • Fuel System
    • Fuel filter positions
  • Lube System
    • Lubricating oil filters and breathers
    • Oil filter positions
    • Lube oil sump
  • Power Take Off
    • SAE B Power Take Off (PTO)
  • General
    • Timing case and gear-driven auxiliaries
    • Belt-driven auxiliaries
    • Engine mountings
    • Gauges
    • Displays
    • Power and torque curve tailoring
    • Paint: Caterpillar yellow, with optional colors available at request