Product Description
C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)
Dimensions & Weights
- Length
- 43.1in
- Height
- 35.1in
- Minimum Width
- 31.4in
- Maximum Width
- 33.5in
- Minimum Engine Dry Weight
- 1609lb
- Maximum Engine Dry Weight
- 1676lb
Power Rating
- Power Range
- 208 bkW (280 bhp) @ 2300 rpm
Engine Specifications
- Configuration
- In-line 6, 4-stroke-cycle diesel
- Emissions
- U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
- Rated Engine Speed
- 2300 rpm
- Bore
- 4.13in
- Stroke
- 5.31in
- Displacement
- 428in³
- Aspiration
- Turbocharged-aftercooled aspiration
- Governor
- Electronic (A5E2 V2 ECM)
- Refill Capacity
- Lube Oil System w/Oil filter change: 20 L (5.3 gal)
- Oil Change Interval
- 500 hrs
- Cooling
- Heat exchanger or keel cooled
- Flywheel Housing
- SAE No. 03 with SAE 11.5 in flywheel
- Rotation
- Counterclockwise from flywheel end
Standard Equipment
-
- Cooling System
-
- Gear driven jacket water pump
- Corrosion resistant sea water aftercooler
- Fuel cooler
-
- Exhaust System
-
- Watercooled turbocharger and exhaust manifold
-
- Fuel System
-
- Common rail fuel system
- Electric fuel priming pump
-
- General
-
- Vibration damper and guard
- Self-tensioning multi-vee belt drive
-
- Lube System
-
- Closed crankcase ventilation system
- Integral engine oil cooler
-
- Mounting System
-
- Front and rear engine mounting brackets
-
- Starting System
-
- Starter motors - 12V or 24V
Optional Equipment
-
- Air Inlet System
-
- Various 6" water cooled exhaust elbow configurations
-
- Cooling System
-
- Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
- Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
- Jacket water heater
- Cabin heater (calorifier) connections
-
- Fuel System
-
- SOLAS double wall high pressure fuel lines kit
-
- Lube System
-
- Left-hand and right-hand oil dipsticks
- Transmission gear oil cooler (engine mounted)
-
- Protection System
-
- Additional engine and transmission sensor packages for on or off vessel monitoring
-
- Starting System
-
- Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
- Glow plugs