3508 Land Mechanical Drilling Engine

Product Description

Cat 3508 engines set the standard in the drilling industry. For many years the 3500 has been the preferred choice by drillers due to their high performance, durability, and reliability in the oilfield. The ideal application for the 3508 engine is mechanical drive for land drilling rigs. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3508 engines, with ratings: 3508 engines, with ratings: 507-846 bkW (680-1135 bhp) @ 1200-1900 rpm. Not emissions certified, available for non-regulated areas.

Engine Specifications

Maximum Rating
1135BHP
Emissions
Non-certified
Displacement
2111in³
Minimum Rating
680BHP
Bore
6.69in
Stroke
7.48in
Rated Speed
1900r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
W3161
Engine Weight - Net Dry
9500lb
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
151

Capacity for Liquids

Minimum Cooling System - Engine Only
27.2gal (US)

Dimensions

Length
84.1in
Width
67in
Height
67.7in

Standard Equipment

  • Air Inlet System
    • Corrosion-resistant aftercooler core
    • Regular duty air cleaner
    • Service indicator
  • Control System
    • Governor, Woodward 3161 — RH
    • Pneumatic control
    • Governor control - positive locking
  • Cooling System
    • Thermostats and housing (dual outlet)
    • Jacket water pump, gear driven
  • Exhaust System
    • Dry exhaust manifold
    • Exhaust flexible fitting, adapters, and flanges
  • Flywheel And Housing
    • SAE No. 00 flywheel
    • SAE No. 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Fuel filter
    • Fuel transfer pump
    • Flexible fuel lines
    • Fuel priming pump
  • Instrumentation
    • Analog instrument gauges:
  • Lubrication System
    • Crankcase breather
    • Oil cooler
    • Oil filter
    • Shallow oil pan
    • Oil drain extension, 2 in NPT female connection
  • Mounting System
    • Rails, mounting, floor type
  • Power Take-offs
    • Accessory drive
    • Front housing, two-sided
  • Protection System
    • Manual shutoff control, LH
    • Junction box
    • Safety shutoff protection, energized to shutdown
  • Starting System
    • Air starting motor
    • Air silencer
  • General
    • Paint - Cat yellow
    • Vibration damper and guard
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Heavy duty air cleaner
    • Remote air inlet adapters
  • Control System
    • Load sharing governor, 2301A
    • Load sharing module
    • Governor conversion to 0-200 mA direct rack control
    • Local speed throttle control
    • Throttle position sensors
  • Cooling System
    • High gloss black folded core radiators and conventional core radiators
    • Belt guard
    • Blower fan
    • Fan drive and fan pulley
    • Radiator cover
    • Water level switch gauge
    • Air separator
    • Coolant level sensors
    • Connections
  • Exhaust System
    • Exhaust elbows
    • Exhaust mufflers
  • Fuel System
    • Primary fuel filter
  • Generator And Attachments
    • Low voltage extension box
    • Potential and current transformers
    • Air filter
    • Cable access box
    • Bearing RTDs
  • Instrumentation
    • Customer management device
    • Gauges and instrumentation panels
    • Switches and contactors
  • Lubrication System
    • Crankcase fumes disposal
    • Oil pan accessories
  • Power Take-off
    • Crankshaft pulley
    • Front stub shaft
    • Charging alternator
    • Air compressor
  • Protection System
    • Explosion relief valves (3)
    • Shutoffs
    • Switches and contactors
  • Starting System
    • Manual air starter
    • Air pressure regulator
  • General
    • Flywheel guard