Product Description
G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3608 ADEM™4 Gen 1 gas engine with standard ratings: 1864 bkW (2500 bhp) @ 1000 rpm and Cat G3608 ADEM™4 Gen 2 gas engine standard ratings:1864 bkW (2500 bhp) @ 1000 rpm and uprated ratings: 2051 bKW (2750 bhp) @ 1000 rpm. NSPS site compliant capable.
Engine Specifications
- Maximum Rating
- 2750BHP
- Rated Speed
- 1000rpm
- Emissions
- Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
- Minimum Rating
- 2500BHP
- Length
- 199.62in
- Compression Ratio
- Gen 1 (9.2:1) Gen 2 (7:6:1)
- Width
- 2188.8mm
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Height
- 116.18in
- Displacement
- 10350in³
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Ignition, Protection
- ADEM™4
- Stroke
- 11.8in
- Bore
- 11.8in
- Weight - Dry
- 46500lb
Capacity for Liquids
- Cooling System
- 140gal (US)
- Lube Oil System - Refill
- 241gal (US)
Standard Equipment
-
- Air Inlet System
-
- Air Cleaner
- Air Inlet Adapter
-
- Control System
-
- ADEM 4
-
- Cooling System
-
- ANSI Class 150 4 inch Flange (outlet water connection)
- ANSI Class 150 6 inch Flange (Inlet Water connection)
- Engine driven water pump
- Water Jacket Outlet Regulator 88° C
-
- Engine System
-
- Engine rating and speed selection
-
- Exhaust System
-
- Hard heat shielded exhaust manifolds. SAE Standard
- Vertical Exhaust Outlet
-
- Flywheel And Flywheel Housing
-
- Flywheel SAE Standard
-
- Fuel System
-
- ANSI Class 150 2 inch Flange (Customer Connection)
- Fuel Filter
- Gas Pressure regulator
-
- General
-
- Paint
-
- Instrumentation
-
- Basic HMI Engine Interface
-
- Lube System
-
- Breathers
- Closed Crankcase ventilation system
- Engine driven oil pump
- Front and Rear Oil Drains
- Oil filter
- Oil Pan
- Oil Supply line
- Pre-lubrication Pump
- Temperature regulated oil cooler
-
- Mounting System
-
- Six mounting feet
-
- Mountin System
-
- Two Lifting eyes
-
- Power Take-offs
-
- Damper guard, Stub Shaft
- Single Damper
-
- Protection System
-
- Crankcase explosion relief valve
-
- Starting System
-
- Air starting motor
- Engine Barring Device
-
- Telematic System
-
- Cat Connect Technology
Optional Equipment
-
- Air Inlet System
-
- Heavy-duty air cleaner — with precleaners
-
- Control System
-
- Software Development
-
- Exhaust System
-
- Exhaust Expander
- Flex EXH Fitting
- Weld Flange EXH
-
- Fuel System
-
- Fuel Connection
-
- General
-
- Language Decals
- Service Tools
-
- Lube System
-
- Lubricating Oil
- Oil Level regulator
-
- Mounting System
-
- Six mounting plates
-
- Telematic System
-
- Cell - Satellite Radio
- Interconnect Harness
- LAN Adapter
- Product Link Harness